service wear
英 [ˈsɜːvɪs weə(r)]
美 [ˈsɜːrvɪs wer]
网络 工作磨损; 运行磨损; 工作台磨损
双语例句
- With service wear of DPF, or due to improper regeneration control, DPF burnout or sintering may occur, leading to DPF failure.
随着DPF的使用，可能会出现老化或者由于再生控制不当出现DPF烧漏、烧结而导致DPF失效。 - Abrasion failure is a key failure form for mechanical parts in the field of mine, metallurgy and electric powder. A lot of equipments serve under service impact abrasive wear environment.
磨损是机械零件的主要失效方式之一，在矿山、冶金和电力等工业领域，有很多设备都是在服役环境异常恶劣的冲击磨料磨损条件下进行工作的。 - Butterfly valves can be used for on/ off service and throttling/ balancing. This will minimize line wear by distributing stem and disc weight evenly.
蝶阀通过开启／闭和节流／衡来对管道系统进行控制和调节。这样可以减少由于均衡分散阀杆与蝶板重量所造成的管道损耗。 - These test data are very important not only to prediction of service life of machine and to selection of wear resistant materials but also to investigation of rapid wear mechanism in sandy water.
这对于预测在含沙水流中工作的机器的使用寿命或选用耐磨材料以及对于沙水中快速磨损机理的研究都具有重要意义。 - People working for big organizations like the police and the postal service wear a uniform.
在大型单位工作的人，比如警察和邮电业服务人员，都需要穿统一的制服。 - Service shall include the labor and parts required to repair Product which has become defective through normal wear and usage. This does not include consumable and their installation.
维修包括维修正常磨损及使用损坏的产品所需要的劳务以及配件，但不包括消耗品及它们的安装。 - The external causes include the effects of environmental and service conditions to which concrete is subjected, such as weathering, chemical actions and wear.
外在起因包括混凝土被服从环境和服务情况的作用，譬如风化、化工行动和穿戴。 - We are the OEM service factories with Disney& Barbie these two famous brands of Children Wear.
我们的工厂是迪士尼及芭比两个名牌童装的签约加工工厂。 - Therefore the force condition of the mechanism is improved, and the service life of the drive chain is prolonged, thereveral impact and wear of the guide are reduced.
这些措施改善了整机受力状况，提高了链条寿命，减少了换向冲击和导轨磨损。 - Hull section moduli of ships in service are treated as random variables due to corrosion and wear. A method based on linearization of a random function is described.
把营运船舶的船体剖面模数看做受蚀耗影响的随机变量，基于随机变量函数线性化提出一个简单方法。 - Based on analyzing the structure, properties and service condition of various wear resistant steels, the developing trend of the wear resistant steel is presented.
通过分析各种抗磨钢的组织、性能以及应用工况和环境，指出了抗磨钢的发展方向。 - In order to extend the service life of hot working dies, the wear resistance, red hardness, thermal fatigue resistance as well as strength and toughness of the dies should be improved upon.
延长热作模具使用寿命，必须提高模具的耐磨性、红硬性、耐热疲劳性能及具有良好的强韧性。 - Steel cable strong belt is widely used in mine in port and in power etc, as it has the property of long service life, stand wear and tear and transportation burden.
钢丝绳芯强力皮带以其使用寿命长、耐磨损、运输距离长、运输量大等优点，被广泛使用在矿山、港口、电力等生产部门。 - The service condition and wear mechanisms of RH submerged tube castables are introduced.
介绍了RH浸渍管浇注料的使用条件和损毁机理。 - It bas been proved by a series of research that using the double-rocker linkage steering obtained by the method of this article for the low-speed automobiles may prolong the service life of the wheel bearings and reduce the wear of the tyres.
一系列研究表明，采用按该方法获得的前轮双摇杆转向机构，可使低速型汽车车轮轴承寿命延长，车轮外胎总磨损量减小。 - The hardness and wear resistance of the layer are significantly increased, service life of wear plate and wear ring is extended.
此法使耐磨层的硬度、耐磨性有明显提高，延长了耐磨板、耐磨环的使用寿命。 - The paper is dealing with introduction of the standards about design, manufacturing and service wear of cutters used for planing the hard surfaces of straight-teeth conical gear. Parameters and technical requirements for planing are also concerned.
介绍刨削加工直齿锥齿轮硬齿面刀具的设计、制造和磨损标准，及加工零件参数和技术要求。 - The service life of engine has relation to the wear state of cylinder liner and the wear state of cylinder liner concerns the 3D ( three dimensions) distribution of hydrodynamic lubricant oil film along the 3D surface of cylinder liner.
内燃机的寿命与气缸套的磨损状况有关，气缸套的磨损状况又与沿气缸3维表面的流体动压润滑油膜的分布密切相关。 - The results in service at 8240 diesel engine showed that as compared with forging crankshafts, there was no wear abrasion scaling observed to better resolve the problem about wear abrasion scaling off.
在8240柴油机上装车使用结果表明，与锻钢曲轴相比，没有观察到表面磨损脱落，较好地解决了曲轴的磨损脱落问题。 - The TPE V belt featured simple processing technology, lower energy consumption, easy size change, flexible production, and longer service life, small elongation, accurated dimension and good wear resistance of finished product.
采用热塑性弹性体生产V带具有工艺简单、能耗低、效率高、V带换型简便、生产灵活性好、产品使用寿命长、伸长小、尺寸准确和耐磨性好等特点。 - So, it is significant to develop the new impact-corrosion-wear resistant materials and increase the service life of the workpieces under the interaction of impact, corrosion and wear.
因此，研究开发新型的耐冲击腐蚀磨损材料，提高工件在冲击、腐蚀和磨损交互作用下的服役寿命具有现实意义。 - The measures for removing the heredity of needle-like carbide were investigated using different technology, such as remelting, overheating and electromagnetic stirring. The theory was provided for studying the hereditary effect of casting alloy and increasing the service life of wear resistant material.
并采用重熔、过热以及电磁搅拌三种工艺措施，探讨消除不良遗传物质&针状碳化物的最佳途径，为铸造合金遗传性研究以及提高耐磨材料的服役性能提供了理论依据。 - The in-use gear oil cannot meet the requirements on service performance of gear oil, and different degrees of adhesive wear phenomena occurred in the surface of gears.
非公路运输自卸车辆在用齿轮油使用性能无法满足其对齿轮油性能的要求，齿面出现不同程度的粘着磨损现象。 - And the main reasons that cause the short service life of working rolls and serious wear of tension rolls in the PL-TCM are the unreasonable distribution of torques of rolls and the unbalance of loads.
而在酸洗轧机联合机组中，拉矫机工作辊寿命短、张紧辊辊面磨损严重，其主要原因则是辊系的力矩分配不合理与负荷不均所致。 - During a long service life of the rail, the natural processes of wear and deterioration of rail steel can result in a rapid condemnation of rail.
在长期的运营过程中，钢轨材质的磨耗和退化的自然过程，随着其不断的发展，可能导致钢轨的迅速失效。 - Die service life is a comprehensive technology problem. And wear is the predominant factor which affects the die service life, especially at high temperature the failure is caused by wear in over 70% cases during extrusion forming process.
模具寿命是一个综合性的技术问题，在挤压成形过程中，磨损是影响模具寿命的决定性因素，尤其在高温成形过程中，模具因磨损而失效的情况超过70%。 - At the same time as the train service time increases, the train components wear out more rapidly resulting in the rapid disintegration of its performance parameters, seriously affected the quality of train running.
同时随着列车服役时间的增加，列车零部件磨损加快导致其性能参数快速蜕变，严重影响了列车的运行品质。 - But the practical use of titanium alloy and its service life is not satisfied because of its poor friction property, low wear resistance and low thermal conductivity.
然而钛合金的摩擦系数高、耐磨性差、热导率低，严重影响了其使用性能和使用寿命。 - Especially, with the development of modern industry. A large number of engineering parts in the complex work environment of high temperature and high pressure. The service life of mechanical parts was reduced by the surface wear and corrosion.
特别是随着现代工业的发展，大量工程零部件处于高温高压等复杂恶劣的工作环境下，机械零部件因材料表面的磨损、腐蚀而大大缩短使用寿命，严重影响生产效率。 - However the traditional lubrication oil only prolong the service life of the machine by only reducing the wear between surfaces of relative movement without offering the self-repairing ability during friction. Additives can greatly improve the performance of lubrication oil.
降低磨损的有效措施之一就是进行润滑，但传统的润滑油只起减少相对运动表面的磨损，延长使用寿命的目的，不具备在摩擦过程中对磨损表面自修复的能力。